COMET S6 I

Обработващ център за алуминий, пвц и метал

COMET S6 I

Technical data

PROCESSING CENTER

/ Aluminium, PVC and Steel /

4-axis CNC machining centre used for the machining of bars or aluminium, PVC, light alloys in general and steel pieces. It is equipped with two operating modes: a single work area for bars up to 7 m length or two independent work areas in double mode.

The machine is equipped with independent motorized vices that allow positioning the vices in concurrent operation time during the operation in dynamic pendular mode. The 4th axis allows the electrospindle to continuously rotate to NC from -120° to +120° on horizontal axis, to perform the work on the upper side and on all the lateral sides of the profile.

It is equipped with a 10-place tool magazine, on the X axis gantry, able to host also one milling disc. It also has a mobile work table that facilitates the workpiece loading/unloading operation and significantly increases the workable section.

ESTIMATE REQUEST

SERVOCONTROLLED CLAMPS

The servocontrolled clamps, each with their own motor, can independently position themselves on the working field. The CNC simultaneously manages the handling of the clamps and the head of the electrospindle in the two different working fields in double operation. This enables significant increases in productivity. The use of absolute reference axes enables reducing the time for machine initialisation at each restart.