TKE 158

Technical data

Manually controlled single head copy router with pneumatic clamping and traverse of the head with indirect lever. Tool rotation speed editable with electronic inverter to allow the machining of steel up to 2 mm, and to improve the quality of milling and tool life. Ability to run through machining of aluminum without turning the workpiece. Scratch-proof. Manually controlled stylus.

Estimate Request

Technical data

CHARACTERISTICS 

Motor with inverter (kW)
1,1

Tool speed (rpm)
1.000 ÷ 10.000

Travel (X-Y-Z) (mm)
380 – 150 – 250

Vice capacity (mm)
200 x 200

Toolholder with gripper
ER 16

Max. tool diameter (mm)
10

Max. tool length (mm)
95

Pair of horizontal vices
 

Pair of vertical vices
 

Pair of vertical vices on side brackets
 

Rapid tool change
ISO 30

Adjustable clamp jaw
 

One tooth end-mill (mm)
Ø = 5 - 10

Mill-holder collet complete with lock-nut (mm)
Ø = 5/6 – 9/10

Indirect head translation lever
 

4-diameter sensor
Ø = 5 - 6 - 8 - 10

Tool speed adjustment potentiometer
 

Micro-mist lubrication system with water and oil emulsion
 

Injection lubrication system
 

Air refrigeration system (temperature reduction of 30°C at 6 bar compared to the inlet air temperature) and lubrication with 1 injection nozzle, for applications with dry machining tools
 

Laser pointer
 

Template with standard figures
 

Right and Left profile-supporting shelves with 4 excludable stops
 

Central stop that slides along linear guides
 

Tool holder storage built into the base, holds 4 tools
 

Head movement along precision linear guides
 

Stop devices along the travel of axes X, Y, Z, with precision metric rod
 

Included       

Available

Indirect head translation lever

The tool travels along the horizontal plane manually using a lever that minimises the strength required by the operator. The height of the handle is adjustable for a practical and ergonomic use.

Control joystick

The lever allows performing the vertical movement of the milling unit. A motor starter button is found on the joystick. The electrospindle has a tool holder with an ISO 30 quick coupling; there are 4 housings on the sides of the machine for 4 toolholders.

Vices

The machine has manually adjustable pneumatically controlled horizontal vices that guarantee the profile is correctly clamped in the machine. For better profiles clamping when required, a couple of vertical pneumatic vices is available as an optional.

Stop devices and roller conveyors

The roller conveyors positioned on the right and left support the machining of the very long profiles. Moreover, a system of manually-regulated stop devices, also on the right and left, allows positioning the workpiece in the machine correctly, taking it to the work area.

Control with inverter

The control panel allows the machine to be activated, the motor to be switched on and the vices to be opened and closed. The presence of the inverter allows the revs of the motor to be changed by means of a potentiometer on the console, thereby making the machine suitable for steel processing. An optional air-cooling system at - 20°C allows stainless steel to be processed up to a thickness of 2 mm.