V-CUT

Technical data

Fully automatic CNC cutting centre with 3 controlled axes, designed for cutting profiles of aluminium, PVC, or light alloys in general. Starting off from the extruded barstock, V-CUT carries out the loading, cutting and unloading of predefined and optimized cutting lists automatically. It is able to perform cuts from 45° to 135° or from 22°30’ to 157°30’.

ESTIMATE REQUEST

Technical data

AXIS STROKES 

U AXIS (bar positioning) (mm)
7.000

WORK AREA 

Max. loadable length (mm)
7.000

Theoretical minimum cutting length (mm)
0

Max. profile length that can be unloaded automatically (mm)
2.500

CUTTING UNIT 

Blade diameter at carbide-tipped (mm)
Ø = 550

Hydro-pneumatic blade feed
 

Pre-set for swarf exhauster
 

CUTTING DIAGRAM 

 

 

FUNCTIONS 

Workpiece cutting and separation directly from the bar
 

PROFILE POSITIONING 

Automatic positioning/unloading
 

Loading feeder with 2 controlled axes for workpieces of up to 7,000 mm with collet
 

SAFETY DEVICES AND PROTECTIONS 

Metal enclosure guard on three sides
 

LUBRICATION SYSTEM 

Minimal oil diffusion lubrication system
 

WORKPIECE LOCKING 

Vertical pneumatic vices
3

Additional vice for reduced-size profiles
 

Vice pressure reduction with pressure gauge
 

Minimum size of profile machinable without additional vice (mm)
30 X 30 (*)

 

(*) indicative data: to be checked on specific profiles and machinings

 

MOTOR 

Power rating (kW), “three-phase” blade drive motor
3

INDUSTRIAL HUMAN-MACHINE INTERFACE PC (STANDARD) 

CNC-PC with I3 (dual core) processor
 

Included       

Available

Loading magazine

Automatic bar loading and positioning magazine with pilgrim step, capable of housing profiles with a maximum length of 7 metres and a minimum length of 3.0 metres. Loading capacity of 7 bars with 240 mm pitch. Maximum loadable weight 500 Kg.

Cutting module

Front single-head machine with hydro-pneumatic outfeed movement provided with a 550 mm blade featuring wide cutting range: from 45° to 135° or from 22°30’ to 157°30’ (based on model). Setting of the cutting angles is managed in a completely automatic way by the CNC.

Bar positioning

The extremely fast and accurate bar positioning system is complete with gripper for profile locking. The automatic position is adjusted through CNC.

Unloading magazine

Large-capacity unloading and storage magazine for finished workpieces, available in two versions: for workpieces up to 4.0 meters in length or, alternatively, for workpieces up to 7.5 meters in length.

Soundproofed cabin (Optional)

The industrial label printer allows each cut profile to be identified with identifying features from the cutting list. In addition, barcode printing enables easy identification of the profile itself, which is particularly useful for subsequent machining steps on Machining Centres or assisted assembly lines.

Label printer (Optional)

The industrial label printer allows each cut profile to be identified with identifying features from the cutting list. In addition, barcode printing enables easy identification of the profile itself, which is particularly useful for subsequent machining steps on Machining Centres or assisted assembly lines.