COMPOUND CUT

Двуглав циркуляр за алуминий и пвц

COMPOUND CUT

Технически данни

Двуглав циркуляр

/Алуминий и ПВЦ/

Двуглав циркуляр с 9 оси на управление, включително автоматично задвижване на подвижната глава, електронно управление на две въртящи се оси на режещите блокове, подаване на диска и вертикала транслация на режещите блокове за постигане на максимална работна зона.

Позволява да се постигнат ъгли от 45° (вътрешни) до 22°30’ (външни) по хоризонталната ос и от 0 до 45° по вертикалната, с прецизност до десетичната запетая. 600-mm дискове widia могат да бъдат подадени и по двете оси, като така се оптимизира диаграмата на рязането вертикално, за да могат да се срязват профили с височина по-голяма от 500 mm и да се подсигури оптимална настройка на скоростта на излизане на диска и ход.

Високоскоростната (HS) версия е с по-висока скорост на оста X и е снабдена с всички защити, необходими за автоматични операции по обработване дори и при отсъствие на оператор.

НАПРАВЕТЕ ЗАПИТВАНЕ

COMBINED CUT

 

The inclination of each head, up to 22°30’ outwards, is obtained by means of a mechanical transmission with high- precision gear motor and brushless motor with absolute encoder.

The tilting is performed by means of an electric actuator with recirculating ball screw and brushless motor. To ensure an optimal positioning, the positioning accuracy is checked upstream of the kinematic transmission chain, through a rotary absolute encoder.

 

BLADE FEED ON 2 AXES

 

The blade feed is carried out on two axes. The vertical translation, associated with the blade exit movement, increases the cutting chart height dimension significantly, allowing for maximum use of the large diameter of the blade. The tool trajectory is managed by the software based on the cutting program, on the profile and on the head inclination.

PROFILE CLAMPING

 

The machine is equipped with a system with clamps that swings horizontally and, by means of horizontal hold- down devices, clamps the profile for an extremely precise cut. For vertical clamping, particularly for special cuts, the machine can be equipped with a patented system of horizontal hold- down devices.

Compound Cut is equipped with a roller conveyor on the mobile head, for standard loading and unloading and intermediate pneumatic supports of the bar.

CONTROL

 

The ergonomic state-of- the-art control panel features a 10.4” touchscreen display and fully customised software and is packed with functions developed in the Microsoft Windows® environment specifically for this machine. The machining cycle can be optimised by creating cutting lists, thereby reducing scrap and cycle times for parts loading- unloading.

HS – HIGH SPEED

 

The HS – High Speed version is equipped with a faster X axis (mobile head positioning), and features an integral protection on the sides and at the back, to operate in complete safety, increasing productivity. The safety characteristics of this version, fully inaccessible during operation, allow using automatic cutting cycles, even not supervised, at maximum operational performance.